LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Transmission Replacement >> Installation Procedure

Installation Procedure

  1. Install the wiper transmission into the vehicle.
  2. Connect the washer hose to the wiper transmission.
    3. Fig 1: Identifying Wiper Transmission Assembly
    GM1244682Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the wiper transmission fasteners.

    Tighten:  Tighten the wiper transmission fasteners to 6 N.m (53 lb in).

  4. Install the drive link onto the wiper motor crank arm with the J 39529  . See Special Tools .
  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Install the wiper arms. Refer to Wiper Arm Replacement .
  7. Close the hood.
scientia non olet · About LEMON Manuals