LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Washer Pump
    GM697668Courtesy of GENERAL MOTORS CORP.
  1. Position the washer pump to the washer solvent container pressing in until fully seated.
    2. Fig 2: Identifying Front Washer Pump Electrical Connector
    GM697664Courtesy of GENERAL MOTORS CORP.
  2. Connect the washer hose to the washer pump.
  3. Connect the washer pump electrical connector.
  4. Fill the washer solvent container with washer solvent.
  5. Install the powertrain control module (ECM). Refer to Engine Control Module (ECM) Replacement in Engine Controls - 6.0L.
  6. Close the hood.
scientia non olet · About LEMON Manuals