Installation Procedure
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the electrical connector (1) to the back of the inside rearview mirror (2).
- Center the bottom of the inside rearview mirror on the support.
- Rotate the mirror COUNTERCLOCKWISE until an audible click is heard. An audible click is heard when the inside rearview mirror is fully seated.
IMPORTANT:
Do NOT pull rearward on the mirror while installing the mirror or damage to the support and/or windshield will occur.