LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the recirculation actuator electrical connector.
    2. Fig 1: HVAC Module & Components
    GM1224363Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the recirculation actuator.

    Install the recirculation actuator mounting screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  3. Connect the HVAC module wiring harness to the recirculation housing wire harness retainer.
  4. Install the RH lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
scientia non olet · About LEMON Manuals