LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Folding Top System) >> Repair Instructions >> Folding Top Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Folding Top Control Module & Electrical Connectors
    GM1509583Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors (1) to the folding top control module (2).
  2. Install the rear compartment carpet. Refer to Rear Compartment Rear Center Trim Panel Carpet Replacement .
  3. Connect the battery. Refer to Battery Negative Cable Disconnection and Connection (6.0L) or Battery Negative Cable Disconnection and Connection (7.0L) .
  4. Close the rear compartment.
  5. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation .
  6. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals