Installation Procedure
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the flat washer, the bushing, and the gripper washer to the clock spring pin.
- Install the clock spring with pin to the arm.
- Install the clock spring nut.
Tighten: Tighten the nut to 4 N.m (35 lb in).
- Grasp the end of the clock spring with vice grips or pliers.
- Wind the clock spring and insert the end of the spring into the roof link pin.
- Reposition the folding top to the original position.
NOTE:
Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.