Front Caster and Camber Adjustment

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rotating Cam Bolts In Lower Control Arm (Front Adjustment)

Courtesy of GENERAL MOTORS CORP.

Loosen the lower control arm cam bolt nuts.
Rotate the cam bolts to the required caster or camber specification setting. Refer to Wheel Alignment Specifications .

NOTE: Refer to Fastener Notice .

Maintain the caster or camber setting while tightening the cam bolt nuts.
Tighten: Tighten the front lower control arm cam bolt nuts to 170 N.m (125 lb ft).

IMPORTANT: Check the toe setting AFTER changing camber or caster.

Check the caster and camber settings after tightening.
Adjust the caster and camber setting if necessary.