LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal with Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of APP Sensor Electrical Connector
    GM899725Courtesy of GENERAL MOTORS CORP.
  1. Remove the left knee bolster panel. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    3. Fig 2: View Of Accelerator Pedal Position Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator pedal mounting bolts (1).
  4. Remove the APP assembly (2).
scientia non olet · About LEMON Manuals