LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Cushion Frame Replacement - Front >> Removal Procedure

Removal Procedure

  1. Remove the front seat assembly from the vehicle. Refer to Seat Replacement .
  2. Remove the front finish panel. Refer to Finish Panel Replacement - Front Seat - Front .
  3. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
    4. Fig 1: Identifying J-strip
    GM1200364Courtesy of GENERAL MOTORS CORP.
  4. Remove the J-Strip (1) securing the rear of the seat cushion cover to the frame.
    5. Fig 2: Identifying Seat Cover to Frame Push Pins
    GM1293229Courtesy of GENERAL MOTORS CORP.
  5. Remove the push pins (2) securing the seat cover to the frame.
    6. Fig 3: Identifying Seat Belt Buckle Assembly & Bolt
    GM1200371Courtesy of GENERAL MOTORS CORP.
  6. Remove the seat belt buckle bolt (2).
  7. Disconnect the black electrical connector from the seat belt buckle.
  8. Pull the seat belt buckle harness back through the hole in the seat adjuster assembly.
  9. Remove the seat belt buckle assembly by pulling it out through the slot in the seat cushion cover.
  10. Disconnect the electrical connector from the seat back harness.
  11. Disconnect the lumbar electrical connector, if equipped.
  12. Remove the harness clip securing the SIR harness to the seat adjuster.
  13. Disconnect the seat back heating element electrical connector, if equipped.
    14. Fig 4: Identifying Seat Adjuster & Cable
    GM1200365Courtesy of GENERAL MOTORS CORP.
  14. Remove the seat adjuster cable (1) from the seat adjuster.
  15. Remove the cable end from the seat adjuster (2) by removing the ball though the round opening.
    16. Fig 5: Identifying Recliner Assembly to Side of Seat Bolts
    GM1200427Courtesy of GENERAL MOTORS CORP.
  16. Remove the 2 bolts securing the recliner assembly to each side of the seat.
  17. Remove the seat cushion cover and pad. Refer to Seat Cushion Cover and Pad Replacement - Front .
    18. Fig 6: Identifying Seat Cushion Frame to Power Seat Adjuster Frame Nuts
    GM1200433Courtesy of GENERAL MOTORS CORP.
  18. Remove the 4 nuts that secure the seat cushion frame to the power seat adjuster frame.
scientia non olet · About LEMON Manuals