LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> RV Cutaway 4.8 V >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  1. Place the power steering pump pulley on the end of the power steering pump shaft.
  2. Install the power steering pump pulley using J 25033-C  .
    3. Fig 2: Checking Power Steering Pump Pulley Installed Depth
    GM245012Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the power steering pump pulley is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
  4. Install the drive belt. Refer to Drive Belt Replacement in engine mechanical - 4.3L, or to Drive Belt Replacement - Accessory , or to Drive Belt Replacement - Air Conditioning in engine mechanical - 4.8L, 5.3L, 6.0L or to Drive Belt Replacement in engine mechanical 6.6L.
  5. Install the upper fan shroud. Refer to Fan Shroud Replacement - Upper .
scientia non olet · About LEMON Manuals