Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Wheel Speed Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the rear hub unit to the knuckle assembly.
Tighten: Tighten the rear hub unit to the knuckle assembly to 65 N.m (48 lb ft) .
Connect the rear wheel speed sensor electrical connector.