LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra5 LT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Body Front End) >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Hinge Bolts
    GM1309218Courtesy of GENERAL MOTORS CORP.
  1. With the aid of another technician, position the hood in the location marked during removal.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 2 bolts securing the hood to each hinge.

    Tighten:  Tighten the hood-to-hinge bolts to 27 N.m (20 lb ft)  .

  3. Inspect the hood for proper alignment.
scientia non olet · About LEMON Manuals