Installation Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glass in the door and position the glass within the window regulator.
- Install the glass to the window regulator with the screws.
Tighten: Tighten the glass screws to 7 N.m (62 lb in) .
- Install the center pillar molding. Refer to Applique Replacement - Center Pillar Outer in Exterior Trim.
- Install the door seal trim. Refer to Water Deflector Replacement - Door .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.