Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Door Hold-Open Link

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the door hold-open link to the door and the body with the bolts.
Tighten:
- Tighten the door hold-open link-to-body bolt to 25N.m (18 lb ft) .
- Tighten the door hold-open link-to-door bolts to 9 N.m (80 lb in) .
Install the door seal trim. Refer to Water Deflector Replacement - Door .