Front Toe Adjustment
WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the outer tie rods from the knuckle assemblies. Refer to Rack and Pinion Outer Tie Rod End Replacement in Power Steering Systems.
- Turn the right and the left outer tie rods and the adjuster nuts to align the toe to the proper specifications. Refer to Wheel Alignment Specifications .
Specification: Align the toe to 0.0 ± 0.174 degree.
- Reconnect the outer tie rods to the knuckle assemblies. Refer to Rack and Pinion Outer Tie Rod End Replacement in Power Steering Systems.
IMPORTANT:
In this adjustment, the right and the left tie rods must be equal in length, or the tires will wear unevenly.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
In this adjustment, the right and the left tie rods must be equal in length, or the tires will wear unevenly.