LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear License Lamp And Screws
    GM1308867Courtesy of GENERAL MOTORS CORP.
  1. Install a new bulb.
  2. Install the lamp socket in the lamp housing.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the lamp assembly with the screws.

    Tighten:  Tighten the lamp assembly screws to 4 N.m (35 lb in)  .

  5. Connect the negative battery cable.