LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear License Lamp And Screws
    GM1308867Courtesy of GENERAL MOTORS CORP.
  1. Install a new bulb.
  2. Install the lamp socket in the lamp housing.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the lamp assembly with the screws.

    Tighten:  Tighten the lamp assembly screws to 4 N.m (35 lb in)  .

  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals