LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Power Steering System) >> Repair Instructions >> Rack and Pinion Boot Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Cylinder End Dust Boot, Retaining Clamp And J 22610
    GM1290118Courtesy of GENERAL MOTORS CORP.
  1. Install the dust boot.
  2. Install the tie rod end dust boot retaining clamp.

    Install the cylinder end dust boot retaining clamp with J 22610  .

  3. Install the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .
  4. Install the wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals