Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Hose Inlet Bolt and Ring Seals - Rear | 32 N.m | 24 lb ft |
| Brake Hose Inlet Fitting-to-Caliper Bolt - Front | 40 N.m | 30 lb ft |
| Caliper Bleeder Valve - Front | 8 N.m | 71 lb in |
| Caliper Mounting Bolts - Rear | 56 N.m | 41 lb ft |
| Caliper-to-Steering Knuckle Mounting Bolts - Front | 95 N.m | 70 lb ft |
| Hub Bolts - Rear | 65 N.m | 48 lb ft |
| Lower Caliper Mounting Bolt - Rear | 27 N.m | 20 lb ft |
| Parking Brake Shoe Hold-Down Spring Assembly Screw - Rear | 4 N.m | 35 lb in |
| Retaining Frame-to-Caliper Housing Bolts - Front | 27 N.m | 20 lb ft |
| Rotor Detent Screw - Rear | 4 N.m | 35 lb in |
| Rotor-to-Front Wheel Hub Detent Screw - Front | 4 N.m | 35 lb in |
| Splash Shield-to-Steering Knuckle Screws - Front | 4 N.m | 35 lb in |