LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Chime Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Chime Module And Electrical Connector
    GM1515800Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the chime module with the screws.

    Tighten:  Tighten the chime module screws to 4 N.m (35 lb in)  .

  2. Connect the electrical connector.
  3. Install the knee bolster. Refer to Knee Bolster Replacement .
  4. Connect the negative battery cable.