LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Controls - 1.4L DOHC - Introduction And Mechanical Repairs) >> Repair Instructions >> Engine Control Module (ECM) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of ECM Mounting Bracket And Bolt And Nut
    GM1289497Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the ECM mounting bracket with the bolt and the nut.

    Tighten:  Tighten the ECM mounting bracket bolt and the nut to 12 N.m (9 lb ft)  .

    2. Fig 2: View Of Engine Control Module
    GM1289488Courtesy of GENERAL MOTORS CORP.
  2. Install the ECM with the nuts.

    Tighten:  Tighten the ECM nut to 12 N.m (9 lb ft)  .

scientia non olet · About LEMON Manuals