LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - 1.8L (L79) - Introduction And Mechanical Repairs) >> Repair Instructions >> Engine Control Module (ECM) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying ECM
    GM1289499Courtesy of GENERAL MOTORS CORP.
  1. Connect the ECM connectors to the ECM.
  2. Align the ECM into the mounting base.
  3. Snap the ECM into its mounting base.
  4. Install the ECM trim locks.
  5. Connect the negative battery cable.
  6. Perform a crankshaft position system variation learning procedure. Refer to CKP System Variation Learn Procedure .
scientia non olet · About LEMON Manuals