LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Optra LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.0L (L34 GMDAT) - Introduction And Mechanical Repairs >> Repair Instructions >> Accelerator Pedal with Position Sensor Replacement >> Removal

Accelerator Pedal with Position Sensor Replacement: Removal

    Fig 1: View Of Accelerator Pedal And Retaining Nuts
    GM1670940Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the off position.
  2. Disconnect the Electronic Throttle Control (ETC) connector from the accelerator pedal.
  3. Remove the 3 accelerator pedal retaining nuts.
  4. Remove the accelerator pedal.
scientia non olet · About LEMON Manuals