Installation Procedure

Route the shift lock control solenoid through the opening in the front of the control assembly.

Fig 1: Removing Shift Lock Control Solenoid
Courtesy of GENERAL MOTORS CORP.
Attach the ball-sockets to the control assembly body and the shift-lock control lever.

Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector to the Shift Lock Control Solenoid.

Fig 3: Disconnecting Shift Lock Control Solenoid Connector From Solenoid
Courtesy of GENERAL MOTORS CORP.
Install the automatic transaxle control assembly. Refer to Floor Shift Control Replacement .