Rear Toe Adjustment

Loosen the inner toe link cam bolt and nuts.

Fig 1: Loosening Inner Toe Link Cam Bolt And Nuts
Courtesy of GENERAL MOTORS CORP.
Rotate the cam bolt to the required toe specification settings. Refer to Measuring Wheel Alignment .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Maintain the toe setting while tightening the cam bolt nut.
Tighten: Tighten the rear suspension adjustment link lock nut to 110 N.m (81 lb ft).
Check the toe setting after tightening.
Adjust the toe setting if necessary.