LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu SS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 3.5L - Introduction (2 Of 2)) >> Repair Instructions >> Powertrain Control Module (PCM) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
    2. Fig 1: Disconnecting PCM Harness Connectors
    GM1239105Courtesy of GENERAL MOTORS CORP.
  2. Record the preset radio stations.
  3. Turn the ignition OFF.
  4. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .
  5. Disconnect the powertrain control module (PCM) harness connectors.
    6. Fig 2: Removing PCM
    GM1239103Courtesy of GENERAL MOTORS CORP.
  6. Release the retaining tab located in the battery box lower half using a small screwdriver or other suitable tool.
  7. Remove the PCM by lifting upward after releasing the tab.
scientia non olet · About LEMON Manuals