LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.9L - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal with Position Sensor Replacement >> Removal Procedure

Removal Procedure

Fig 1: Disconnecting Accelerator Pedal Position Sensor Electrical Connector
GM1544734Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor bolts (1).
  3. Remove the APP sensor (2).
scientia non olet · About LEMON Manuals