LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu SS >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LX9) >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE .
Fig 1: View Of Generator, Mounting Nuts & Bolts
GM1239071Courtesy of GENERAL MOTORS CORP.
  1. Install the generator.

    Tighten: 

    • Tighten the bolts to 50 N.m (37 lb ft).
    • Tighten the nuts to 30 N.m (22 lb ft).

  2. Install the generator electrical connections.
  3. Install the drive belt. Refer to DRIVE BELT REPLACEMENT .
  4. Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .
scientia non olet · About LEMON Manuals