Installation Procedure

Fig 1: View Of Battery And Hold Down Retainer

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Do not tip the battery more than 40 degrees during battery installation.

Install the battery.
NOTE: Refer to FASTENER NOTICE .
Install the battery hold down retainer and bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).

Fig 2: View Of Battery Cables
Courtesy of GENERAL MOTORS CORP.
Connect the positive battery cable to the battery.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .