LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu SS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Sedan) >> Installation Procedure

Installation Procedure

Fig 1: Removing & Installing Receiver From Vehicle
GM1250536Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. The transmitter will need to be programmed after replacement. Refer to CONTROL MODULE REFERENCES .
scientia non olet · About LEMON Manuals