LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu Maxx LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Horn System) >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Horn Bracket & Bolts
    GM324755Courtesy of GENERAL MOTORS CORP.
  1. Position the horn to the frame rail extension; insert the horn anti-rotation tab into the slot on the frame rail.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the horn bracket bolt.

    Tighten:  Tighten the bolt to 15 N.m (11 lb ft).

    3. Fig 2: Vehicle Horn
    GM324754Courtesy of GENERAL MOTORS CORP.
  3. Connect the horn electrical connector.
  4. Install the right headlamp. Refer to HEADLAMP REPLACEMENT (MONTE CARLO) in Lighting Systems.
  5. Close the hood.
scientia non olet · About LEMON Manuals