LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu Maxx LT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coil and module assembly.
    Fig 1: Removing/Installing 4 Screws Securing Ignition Coil And Module Assembly To Bracket
    GM1238999Courtesy of GENERAL MOTORS CORP.
  2. Remove the 4 screws securing the ignition coil and module assembly to the bracket.
  3. Remove the ignition coil and module assembly.
scientia non olet · About LEMON Manuals