LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu LS, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.2L (L61) - Introduction (2 Of 2) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing MAF Sensor From Air Cleaner Cover
    GM1236094Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Install the MAF sensor to the air cleaner cover.

    Tighten:  Tighten the screws to 0.6 N.m (5 lb in).

  2. Connect the MAF sensor electrical connector.
  3. Start and idle the engine.
  4. Inspect the air intake duct for leaks.
scientia non olet · About LEMON Manuals