LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu LS, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.2L (L61) - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

Fig 1: Removing & Installing Manifold Absolute Pressure Sensor
GM897270Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor with the port seal into the intake manifold
  2. Connect the MAP sensor harness connector. Push in the connector until a click is heard and pull back to confirm a positive engagement.
  3. Install the throttle body. Refer to THROTTLE BODY ASSEMBLY REPLACEMENT .
  4. Install the air cleaner outlet resonator. Refer to AIR CLEANER OUTLET RESONATOR REPLACEMENT .
scientia non olet · About LEMON Manuals