LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu LS, 2.2 F >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BPP Sensor Calibration

BPP Sensor Calibration

IMPORTANT: If the BCM or the brake apply sensing system (BAS) sensor is replaced, a brake pedal position (BPP) sensor calibration must be performed.

Perform the BPP Sensor Calibration using a scan tool. Refer to BRAKE PEDAL POSITION SENSOR CALIBRATION , for the BPP calibration procedure.

scientia non olet · About LEMON Manuals