LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala SS >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Inflatable Restraint Side Impact Module Wiring Harness At Seat Frame With Retaining Clips
    GM1276234Courtesy of GENERAL MOTORS CORP.
  1. Install the new inflator module wiring harness to the seat. Install the retaining clips that secure the wiring harness to the seat.
  2. Install the side impact inflator module to the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front (Monte Carlo) .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7  or SIR Disabling and Enabling Zone 9 (Monte Carlo)  or SIR Disabling and Enabling Zone 9 (Impala) .
scientia non olet · About LEMON Manuals