Brake Pedal Data List

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

BPPS High During Learn: The scan tool displays No or Yes. The scan tool displays Yes if signal is high during learn.
BPPS Learned Home Position: The scan tool displays voltage. The brake pedal position sensor learned home value of 0-5 volts.
BPPS Low During Learn: The scan tool displays No or Yes.
BPPS Move During Learn: The scan tool displays No or Yes.
BPP Sensor Circuit: The scan tool displays Inactive or Active. The commanded state of the brake pedal position sensor. When the brakes are applied the scan tool will display Active.
BPP Sensor: The scan tool displays Counts. With brake applied displays 1 to 3 counts. Unapplied displays 0.
BPP Sensor Reference: The scan tool displays Counts. Always displays 1 to 3 counts.
BPPS Status: The scan tool displays Unlearned/Learned/Invalid/Undecided. This is the status of the brake pedal position sensor with regards to learning the home position.
Brake Applied Output Signal: The scan tool displays On/OFF. When the brake is applied this parameter displays ON.
Calculated Brake Pedal Position: The scan tool displays counts. when the brake is applied displays 2 counts. When the brake is not applied displays 255 counts.