Circuit/System Testing
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Clear the DTC. Disconnect all the inadvertent power courtesy lamps related components. Refer to the circuit/system verification for all components that contain the inadvertent power courtesy lamps. Verify the DTC B1480 does not set.
- If the DTC resets then test for a short to ground in the inadvertent power courtesy lamps circuit. If the circuit/connections test normal replace the BCM.
- Reconnect each component one at a time and test for the DTC B1480. If the DTC resets then replace that component.