Conditions for Running the DTC

DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0131, P0132, P0133, P0134, P0135, P0136, P0137, P0138, P0140, P0141, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0442, P0443, P0446, P0449, P0455, P0496, P0506, P0507, P1133, P1134 are not set.
The Fuel Trim Learn parameter is enabled.
The engine is in Closed Loop status.
The engine coolant temperature (ECT) is between -40 and +140°C (-40 and +284°F).
The intake air temperature (IAT) is between -20 and +152°C (-4 and +304°F).
The manifold absolute pressure (MAP) is between 15-105 kPa (2.2-15.2 psi).
The vehicle speed is less than 132 km/h (82 mph).
The engine speed is between 400-6,100 RPM.
The barometric pressure (BARO) is more than 70 kPa (10.2 psi).
The mass air flow (MAF) is between 1-250 g/s.
The fuel level is more than 10 percent.
This diagnostic runs continuously when the above conditions are met.