Installation Procedure
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
- Install the sunroof window. Refer to Sunroof Window Replacement .
Tighten: Tighten the screws to 4 N.m (35 lb in).
- Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement .
Tighten: Tighten the motor attachment screws to 3.5 N.m (31 lb in).
- Connect the electrical connector to the motor/actuator.
- Remove the pin (1) from the holes that held the position while installing the drive motor.
- Install the headliner. Refer to Headliner Replacement (Impala) or Headliner Replacement (Monte Carlo) .
- Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initilization/Teach Process .
- Verify the operation of the sunroof.