LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala Police, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - DTC P0442 To DTC P2A01 >> DTC P0650 >> Circuit/System Testing

Circuit/System Testing

  1. Disconnect the engine control module (ECM) connector that contains the MIL control circuit.
  2. Jumper the MIL control circuit with a J 36169-A  at the ECM connector to a good ground.
  3. Turn ON the ignition with the engine OFF.
    • If the MIL illuminates replace the ECM.
  4. Test the MIL voltage supply circuit for an open or short to ground.
  5. Test the MIL control circuit for a short to voltage or a short to ground.
    • If the all circuits test OK replace the instrument panel cluster assembly.