LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala Police, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - DTC P0442 To DTC P2A01 >> DTC P0496 >> Circuit/System Testing

Circuit/System Testing

  1. Start the engine.
  2. Seal the EVAP system using the Purge/Seal function with a scan tool.
  3. Observe the FTP sensor with a scan tool. The Fuel Tank Pressure Sensor parameter should be within -1 to +1 inch H2O.
    • If the Fuel Tank Pressure Sensor parameter is within -1 to +1 inch H2O, the condition is intermittent.
  4. Disconnect the EVAP purge pipe from the EVAP canister purge solenoid valve.
    • If the Fuel Tank Pressure Sensor is between -1 to +1 inch H2O, replace the EVAP canister purge solenoid valve.
  5. If the Fuel Tank Pressure Sensor parameter is NOT between -1 to +1 inch H2O, replace the FTP sensor.
scientia non olet · About LEMON Manuals