LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala Police, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: Always maintain cleanliness when servicing fuel system components.
    Fig 1: Disconnecting The Fuel Level Sensor Electrical Connector
    GM1575965Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel level sensor electrical connector (1).
    3. Fig 2: Pushing In The Fuel Level Sensor Retainer
    GM1575966Courtesy of GENERAL MOTORS CORP.
  3. Push in the fuel level sensor retainer (1).
    4. Fig 3: Sliding The Fuel Level Sensor Downward And Off Of The Bucket
    GM1575967Courtesy of GENERAL MOTORS CORP.
  4. Slide the fuel level sensor (1) downward and off of the bucket.
scientia non olet · About LEMON Manuals