LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Impala Police, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing The Air Inlet Duct From The MAF/IAT Sensor
    GM1556020Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner outlet duct from the MAF/IAT sensor.
    NOTE: Refer to Fastener Notice .
  2. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  3. Install the air cleaner outlet duct to the throttle body.
  4. Tighten the air cleaner outlet duct clamp at the throttle body.

    Tighten:  Tighten the clamp to 3 N.m (27 lb in).

  5. Connect the PCV tube to the air inlet duct. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
scientia non olet · About LEMON Manuals