Circuit/System Testing
WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When removing connectors inspect for damage or corrosion. Damage or corrosion in the following requires repair or replacement of the affected component/connector.
- Passenger presence module
- Passenger presence module wiring harness connector
- Verify that DTC 2001-2054 or 202A-202E is not set.
- If the DTC is set, refer to DTC 2001-2054 or 202A-202E .
- Verify that DTC 3003-3059 is not set.
- If the DTC is set, replace the passenger presence sensor.