LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Coil Housing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coil Housing Bolts
    GM1624634Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition control module, if necessary. Refer to Ignition Control Module Replacement .
  2. Install the ignition coil housing to the camshaft cover.
    3. NOTE: Refer to Fastener Notice .
  3. Install the ignition coil housing bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

    4. Fig 2: Ignition Coil Module Electrical Connector
    GM1625481Courtesy of GENERAL MOTORS CORP.
  4. Connect the ignition control module electrical connector.
scientia non olet · About LEMON Manuals