LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> HHR LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Heat Shield, Rivets & Nuts
    GM1631773Courtesy of GENERAL MOTORS CORP.
  1. Position the exhaust heat shield to the underbody.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the exhaust heat shield nut (2).

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Install 4 NEW heat shield rivets (1).
  4. Install the muffler. Refer to Muffler Replacement .
scientia non olet · About LEMON Manuals