LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Link At Strut Assembly
    GM851723Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Connect the stabilizer link to the strut assembly.

    Tighten:  Tighten the stabilizer link nut to 65 N.m (48 lb ft).

    2. Fig 2: View Of Stabilizer Link At Stabilizer Shaft
    GM851720Courtesy of GENERAL MOTORS CORP.
  2. Connect the stabilizer link to the stabilizer shaft.

    Tighten:  Tighten the stabilizer link nut to 80 N.m (59 lb ft).

  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals