LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Bushings Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  3. Wrap the control arm with a shop towel and place it in a vise.
    4. Fig 1: Removing Control Arm Bushing
    GM851706Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the depth and orientation of the old bushing before removal.
  4. Using theJ 41211  , pull the control arm bushing through the control arm. See Special Tools .
  5. Disassemble the tools and remove the bushing.
scientia non olet · About LEMON Manuals