LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Bushings Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the NEW bushing to the tapered side of the control arm.
    2. Fig 1: Installing Control Arm Bushing
    GM851698Courtesy of GENERAL MOTORS CORP.
  2. Using theJ 41211  , pull the control arm bushing through the opposite direction of the control arm. See Special Tools .
  3. Install the bushing to the same depth and orientation as noted during removal.
  4. Remove the J 41211  from the control arm. See Special Tools .
  5. Install the control arm. Refer to Lower Control Arm Replacement .
scientia non olet · About LEMON Manuals